3 to 4 decadesof pO2 with a p-type slope,
20 nm (111) films, 625 °C
p-type conduction appears only in ultrathin films
Thick films of every orientation show the flat Brouwer response of a pure ionic conductor. The thinnest films, and above all YSZ (111), show conductivity rising with oxygen partial pressure. The contribution vanishes as thickness grows, so it belongs to a nanometric interfacial layer, not to the whole film.
Bader ≈ −1charge on the surface oxygen
hosting the hole (DFT)
A single localized O− hole polaron at the surface
In the (111) slab, oxygen vacancies prefer the surface. Filling them pushes O 2p states up to the Fermi level, and the hole localizes on one surface oxygen instead of spreading as a Bloch state. Bulk supercell studies found paired (O2)3− states; the single polaron here comes from the surface electrostatic environment.
2×2surface superstructure along (220),
YSZ (111) only
Defect order seen directly
HR-TEM shows extra reflections at the (111) surface, typical of vacancy-rich fluorites, absent in (100) films prepared the same way. In situ synchrotron XPS finds more reduced Y and more vacancy-associated O at the (111) surface, and UPS gives a 55 meV lower work function for (111), as predicted by DFT.
M11 ≈ 10−17m2 V−2, 20 nm films on NGO (100)
and sapphire, room temperature
Polarons raise the electromechanical response
All films are electrostrictive, with second-harmonic strain linear in E2. The (100) film sits near 10−18 m2 V−2; the films that show mixed conduction reach about ten times more, comparable to Gd-doped CeO2. Electronic defects and electromechanics go together, as in polaronic ceria.
> 0.5 S cm−1in-plane, 700 °C,
250 nm YSZ (100)
Orientation and thickness steer transport
All epitaxial films on NGO conduct better than bulk YSZ. Conductivity of (100) films falls with decreasing thickness, while that of (111) films rises, at a nearly constant 1.2 eV activation energy. Several transport mechanisms coexist at the nanoscale.