≈ 5 nmcolumn width;
≈ 200 nm film thickness
A self-assembled nano-checkerboard
The perovskite (SPTNO) and fluorite (CGO) phases separate into uniform columns through the whole film thickness, with coherent vertical interfaces. The SPTNO columns carry a nominal +1.7% out-of-plane tensile strain.
1.40 vs 3.68 eVDFT Ni migration barrier,
interface vs perovskite bulk
Interfaces are the fast pathway
Calculations show Ni moves far more easily along the perovskite–fluorite interface than through the perovskite lattice. Nucleation happens at the surface, at the column boundaries.
≈ 80 vs ≈ 33 µm−2particle density after 1 min
at 650 °C, VAN vs single phase
More particles, faster
One minute of reduction gives about 2.5 times the particle density of a conventional epitaxial film, with particles around 17 nm.
≈ 67 vs ≈ 120 nmparticle size after 12 h
at 650 °C
Smaller particles, none trapped, structure intact
No Ni particles remain trapped inside the VAN film, while the single-phase film retains them in the bulk. The columnar order and the film density survive the reduction.