GYROX

Architected solid oxide electrochemical systems

GYROX replaces the planar solid oxide stack with a single printed body of functional metal oxide. The electrolyte is a zirconia gyroid, a triply periodic minimal surface that separates two interpenetrating gas channels. Coated with fuel and oxygen electrodes, the same body works as a fuel cell or as an electrolyser.

Electrolyte
8YSZ gyroid
Process
LCM 3D printing, coating, co-sintering
Modes
SOFC and SOEC
Group
DTU Energy, with DTU Construct
Electrochemical energy beyond Earth. 30 s, no sound.

From stack to monolith

What changes when the architecture is printed.

Planar stackGYROX monolith
GeometryFlat cells, repeated and stackedOne gyroid lattice, two interpenetrating channel networks
InterconnectsMetallic, one per cellNone inside the active body
SealingSeals at every cell interfaceOne sealed shell frame
ManufacturingDozens of fabrication and assembly stepsFive steps
Specific power≈ 0.2 W g⁻¹≈ 1 W g⁻¹
RobustnessInterfaces prone to delaminationNo failure after 100 °C thermal swings and repeated SOFC/SOEC switching

Fabrication

In order of production.

  1. Design

    A digital gyroid model, sized for wall thickness and channel width, sliced into thin layers.

  2. Print

    Lithography-based ceramic manufacturing (LCM) of the 8YSZ body as one piece, with thin gastight walls.

  3. Coat

    Fuel and oxygen electrode inks applied to the two channel networks.

  4. Co-sinter and test

    Firing with the sealed shell frame, then operation in fuel cell and electrolysis mode.

Outlook

Mass-first design

Aerospace and space

Where every gram counts and nothing can be repaired, specific power and monolithic robustness matter more than peak efficiency. Architecture becomes the main design variable.

Scale-up

Towards production

After the design and test phase, the cell concept is being scaled towards industrial manufacturing under the GYROX name.

Publication and coverage